Physical
Connections
The radio cable is connected to the RJ-45 at the back of the
SignaLink, and the other end of the cable is connected to the FT-891
through the DATA connection. A USB cable is connected to the laptop
and the SignaLink. The external speaker is plugged into the rear of
the FT-891.
FT-891 Menu
Settings
08-01 MODE DAT: DATA MODE PSK
08-02 MODE DAT: PSK TONE 1000Hz
08-09 MODE DAT: DATA IN SELECT REAR
08-12 MODE DAT: DATA BFO USB
16-03 TX GNRL: HF PWR 20
16-10 TX GNRL: DATA MIC GAIN 50
16-14 TX GNRL: DATA DATA GAIN 50
Function 1
WDH 3Khz
Windows 10 Settings
Default: Speakers Realtek High Definition Audio
Default: Microphone Realtek High Definition Audio
Line in setting: 0 dB
Fldigi setting for capture/playback. The SignaLink USB is selected for both (USB Audio Codec).
Can see PSK31.
Responding to a CQ (or sending one myself) has not received any response. I don't think I have the ALC setup correctly or the TX/RX volume setup correctly.
